Teaifa® D36-Wave Iron

The Teaifa D36-Wave Iron brings broad, rounded movement to dry hair with a guided clamping design. Its large wave-form styling surface is built for soft water waves and dimensional texture, while fifteen heat levels make it easier to match the routine to finer, normal or more resistant strands.

Key Features:

Rounded Wave Geometry: The sculpted styling area creates open curves with a softer look than a narrow crimping plate.

Large ≥31 mm Profile: A generous heated shape covers medium sections and suits loose waves through longer lengths.

Tourmaline-Ceramic Finish: Smooth surfaces help distribute heat and reduce dragging as the finished bend is released.

Fifteen Adjustable Levels: Fine control lets you begin gently and change the temperature only when the result requires it.

30W Plug-In Design: Corded operation provides consistent power for an at-home wave routine.

A useful choice for dry medium-to-long hair when the goal is open water waves, face-framing movement and soft all-over volume.

Prepare every section carefully, use the lowest effective heat or intensity, and let the finished hair cool before you touch it. With a measured technique, the Teaifa D36-Wave Iron can support anything from a quick daily refresh to a more polished, occasion-ready result.

1. Prepare Your Hair: Start with clean, fully dry and completely detangled hair unless the Teaifa instructions for this exact non-heated scalp tool say otherwise. Apply heat protectant before heated styling, allow it to dry and keep heavy oils or aerosol sprays away from a powered appliance.

2. Divide Into Sections: Use clips to separate manageable layers. Keep each working section small enough to move freely through the styling area; overloaded sections heat unevenly, shape poorly and may snag.

3. Set Up the Tool: Confirm the supplied plug and voltage, rest the tool on a heat-safe surface, select a low temperature and allow the wave plates to warm.

4. Position and Style: Align a clean section within the shaped plates, close lightly for a short hold and keep the heated head away from the scalp, face and hands.

5. Customize the Finish: Continue with evenly spaced presses for a polished pattern or change the angle slightly from section to section for a relaxed finish.

6. Release and Cool: Open the tool before repositioning and let the new bend cool before touching it, stretching it or adding finishing product.

7. Finish Safely: When the routine is complete, switch the tool off, unplug it or confirm cordless power is off, and place it on a stable heat-resistant surface when applicable. Never leave a powered appliance unattended, and do not pack or store it until every heated or moving part is completely cool.

For a consistent result, keep section sizes even and avoid unnecessary repeat passes. Apply any lightweight finishing product only after the hair has cooled and the powered tool has been moved away from sprays and moisture.

1. Power Down and Cool: Switch the tool off after every use, unplug it when applicable and place it on a stable heat-resistant surface. Wait until heated and moving parts are completely cool before cleaning, handling attachments or storing.

2. Clean the Working Area: Wipe the rounded wave surfaces, grooves, hinge and exterior with a soft, slightly damp lint-free cloth. Use a dry soft brush or cotton swab for narrow edges, then make sure every part is dry before the next use.

3. Remove Hair and Product Buildup: Clear loose strands and residue regularly so they are not reheated or pulled into moving parts. Never use abrasive pads, sharp metal tools, bleach, harsh solvents or cleaner sprayed directly onto an electrical appliance.

4. Protect the Power System: Never pull a plug by its cord or wrap a cord tightly around the body. For rechargeable tools, keep the charging port clean and use a compatible charging setup. Stop use if the cord, plug, battery housing or controls appear damaged.

5. Store It Properly: Keep the completely cooled tool in a clean, dry, ventilated place away from sinks, humidity, direct sunlight, children and pets. Protect coatings, bristles and attachments from pressure, scratches and impact.

6. Follow Model-Specific Care: Check the shaped recesses after every session and remove residue gently so the clamping surfaces remain unobstructed.

Consistent cleaning and careful storage help the working surfaces move smoothly and keep the tool ready for the next routine. Never rinse or immerse an electrical styling tool, and never use a heated tool on wet or damp hair unless the exact Teaifa instructions for the received unit explicitly permit it.