Teaifa® 526-Electric Straightening Brush

The Teaifa 526-Electric Straightening Brush is a corded PTC styling brush for smoothing, detangling-through-style and softly shaping dry hair. Its medium-width heated teeth help organize sections without the pinched feel of a traditional flat iron, making it useful for roots, fringes, lengths and gently rounded ends.

Key Features:

21–30 mm Brush Profile: A medium width balances practical coverage with control around the roots and ends.

50W Corded Power: Continuous plug-in operation supports a complete at-home styling routine.

Straight-and-Curve Versatility: Brush downward for smoothness, lift upward for volume or turn the wrist to shape the ends.

One-Level Operation: Simple constant-heat styling rewards small sections, continuous motion and minimal repeat passes.

A straightforward dry-hair brush for smoother lengths, controlled flyaways, lifted roots and softly curved ends.

Prepare every section carefully, use the lowest effective heat or intensity, and let the finished hair cool before you touch it. With a measured technique, the Teaifa 526-Electric Straightening Brush can support anything from a quick daily refresh to a more polished, occasion-ready result.

1. Prepare Your Hair: Start with clean, fully dry and completely detangled hair unless the Teaifa instructions for this exact non-heated scalp tool say otherwise. Apply heat protectant before heated styling, allow it to dry and keep heavy oils or aerosol sprays away from a powered appliance.

2. Divide Into Sections: Use clips to separate manageable layers. Keep each working section small enough to move freely through the styling area; overloaded sections heat unevenly, shape poorly and may snag.

3. Set Up the Tool: Confirm the regional plug and voltage, detangle hair completely, set the brush on a heat-safe surface and allow it to warm.

4. Position and Style: Hold a small section under gentle tension and guide the brush slowly from near the roots to the ends without pressing it against the scalp.

5. Customize the Finish: Brush downward for a smooth finish, lift from underneath for volume or rotate inward near the ends for a rounded shape.

6. Release and Cool: Let the section leave the bristles without pulling and allow it to cool before repeating or adding finishing product.

7. Finish Safely: When the routine is complete, switch the tool off, unplug it or confirm cordless power is off, and place it on a stable heat-resistant surface when applicable. Never leave a powered appliance unattended, and do not pack or store it until every heated or moving part is completely cool.

For a consistent result, keep section sizes even and avoid unnecessary repeat passes. Apply any lightweight finishing product only after the hair has cooled and the powered tool has been moved away from sprays and moisture.

1. Power Down and Cool: Switch the tool off after every use, unplug it when applicable and place it on a stable heat-resistant surface. Wait until heated and moving parts are completely cool before cleaning, handling attachments or storing.

2. Clean the Working Area: Wipe the PTC styling area, heated teeth, base, controls and cord entry with a soft, slightly damp lint-free cloth. Use a dry soft brush or cotton swab for narrow edges, then make sure every part is dry before the next use.

3. Remove Hair and Product Buildup: Clear loose strands and residue regularly so they are not reheated or pulled into moving parts. Never use abrasive pads, sharp metal tools, bleach, harsh solvents or cleaner sprayed directly onto an electrical appliance.

4. Protect the Power System: Never pull a plug by its cord or wrap a cord tightly around the body. For rechargeable tools, keep the charging port clean and use a compatible charging setup. Stop use if the cord, plug, battery housing or controls appear damaged.

5. Store It Properly: Keep the completely cooled tool in a clean, dry, ventilated place away from sinks, humidity, direct sunlight, children and pets. Protect coatings, bristles and attachments from pressure, scratches and impact.

6. Follow Model-Specific Care: Remove hair from between the teeth after every session and never submerge or spray cleaner into the heated brush base.

Consistent cleaning and careful storage help the working surfaces move smoothly and keep the tool ready for the next routine. Never rinse or immerse an electrical styling tool, and never use a heated tool on wet or damp hair unless the exact Teaifa instructions for the received unit explicitly permit it.